Dynalene offer deionization system that small laboratory scale applications (1 to 10 GPM) to large industrial application (up to 40 GPM). These systems are designed and tested for great ion removal in water.
Water Deionization
Low throughput DYI series deionization systems can be easily installed and can be offered for the flow rate of 1 to 10 GPM. These systems can be wall mounted or bought with a stand. These systems are ideal for use in medical, food processing, chemical and semiconductor based application. The DYI series systems are also ideal for in-site DI water making to be blended with glycol to make a glycol-water solution.
DYI series cartridges that are used with these systems are available in various sizes and are designed and tested for great ion removal in water. The cartridges can be custom designed to any size and flow rate based on the customer requirement. Click here to learn more about out Laboratory scale deionization products.
Industrial Application
High throughput DYI series deionization systems can be offered for the flow rate of up to 40 GPM. These systems can be used as a fixed or a mobile DI water making applications. These large scale DYI series systems are ideal for in-site DI water making to be blended with glycol to make a glycol-water solution in large quantities. It can also be used in DI water making for system flushing applications and DI water making large scale manufacturing and processing applications. We can custom design and build the DI water systems to cater to your requirements.
Deionized water (DI water, DIW or de-ionized water) is water that has almost all of its mineral ions, such as cations like sodium, calcium, iron, and copper, and anions such as chloride and sulfate removed. DI Water is the water of choice in many factories and manufacturing settings. It is commonly used in medical, food processing, chemical and semiconductor industry including, industrial cooling applications and manufacturing of cosmetics.
Dynalene recommends using deionized water to be blended with glycol to make a glycol-water solution to maximize the performance of the fluid and the system. It is recommended that the total chloride and sulfate content in the dilution water should be below 25 ppm to minimize the corrosion potential. Hard minerals and salts in dilution water can increase metal corrosion, cause formation of scale and deposits, interfere with inhibitor protection, and clog system components. If mixing on-site, a handheld refractometer or hydrometer can be used to check the propylene glycol concentration. Please fill out the quote request form or contact us today at 610.262.9686 or email at info@dynalene.com and let us help you determine the appropriate deionization solution for your application.