ISO 9001 Certified

Propylene Glycol Series

Propylene Glycol Heat Transfer Fluid and Antifreeze (-50°F to 350°F)

Dynalene Propylene Glycol mixtures use either high-quality industrial grade propylene glycol (PGI) or USP (food grade) propylene glycol with or without corrosion inhibitors and additives to fit your application. The corrosion inhibitors cover a wide range of uses including the typical metals such as carbon steel, cast iron, copper, brass and stainless steel. A special formulation (PG-A1) is recommended for aluminum exposed to temperatures exceeding 50ºC.

Dynalene’s Propylene Glycol series is available in different concentrations to fit your system requirements. We also offer several dye options. Please call the glycol experts at 877-244-5525 or +(1) 610-262-9686 for more information.

To learn more about the other heat transfer fluids that Dynalene offers, please click here.

We also offer Dynalene BioGlycol, a corn-based product, as an alternative to Dynalene PG.

(-50°F to 250°F)
Inhibited propylene glycol

(-50°F to 350°F)
High temp inhibited propylene glycol

(-50°F to 250°F)
Inhibited propylene glycol rated for incidental food contact

(-50°F to 194°F)
Designed for aluminum systems

Propylene Glycol-based low electrical conductivity fluids for battery, EV charging stations, fuel cells and electronics cooling

These blends use either high quality technical grade propylene glycol or food grade propylene glycol with or without corrosion inhibitors and additives to fit your process. The corrosion inhibitors cover a wide range of uses including the typical metals such as carbon steel and copper as well as aluminum at higher temperatures. If you have a question about a specific Propylene Glycol Series product, please call the glycol experts at 877.244.5525 or email info@dynalene.com

Quick Quote

Dynalene PG (-50°F to 250°F)

Dynalene PG is an inhibited technical grade propylene glycol for use in most industrial applications. It is blended with Dynalene PE-1 inhibitor for pH stability and superior corrosion protection for steel, copper, brass and other metals. As with other Dynalene glycol products, Dynalene PG is offered as a full concentrate or we can blend it with DI water to any concentration required.

Applications:

  • HVAC
  • Process Cooling/Heating
  • Industrial Processes
  • Radiant Heating Systems
  • Ice Melting
  • Ice Rink
  • Food and Beverage
 

Dynalene PG-XT (-50°F to 350°F)

Dynalene PG-XT is designed with temperatures up to 350°F in mind. Normal inhibited glycol degrades more rapidly when used above 250°F and produce acids that can be detrimental to the system. Dynalene PG-XT uses additives that neutralize these acids keeping the fluid more stable and increasing the lifetime of the system while maintaining a high level of performance. As with other Dynalene glycol products, Dynalene PG-XT is offered as a full concentrate or we can blend it with DI water to any concentration required.

Applications:

  • Process Heating up to 350°F
  • Solar Thermal
  • High-Temperature Boiler
  • Molding/Casting
  • Inline Heaters
 

Dynalene PG-FG (-50°F to 250°F)

Dynalene PG-FG is offered for systems requiring a food grade product. Dynalene PG-FG is made with food grade and kosher (when needed) propylene glycol for safety in food or beverage process applications. As with other Dynalene glycol products, Dynalene PG-FG is offered as a full concentrate or we can blend it with DI water to any concentration required.

Applications:

  • Restaurants
  • Breweries and Wineries
  • Food Plants
 

Dynalene PG-A1 (-50°F to 194°F)

Dynalene PG-A1 is specifically designed for systems mainly comprised of aluminum. This mixture which uses Dynalene A1 inhibitor goes beyond by protecting aluminum components to temperatures up to 194°F. As with other Dynalene glycol products, Dynalene PG-A1 is offered as a pre-blended w/DI water to a concentration of 25% to 60%

Applications:

  • Aluminum Boilers
  • Aluminum Radiators and Heat Exchangers
  • Any Aluminum or Partially Aluminum System
 

Raw Propylene Glycol

Dynalene offers pure propylene glycol in both technical grade and food grade. This can be used as a raw material in a number of different applications or as a heat transfer fluid, hydronic testing fluid, or a base material for e-cigarette fluid. As with other Dynalene glycol products, raw propylene glycol is offered as a full concentrate or we can blend it with DI water to any concentration required.

Dynalene Glycol Testing

Along with offering the best glycol for your system, Dynalene provides an extensive glycol testing program to help maintain your fluid and prevent costly repairs. Coupling the right propylene glycol product with an excellent fluid maintenance program can extend the life of your coolant and your system and save you money.

Dynalene Specialty Blends

Why purchase a stock glycol when Dynalene can create a blend custom-made for your specific application? Specialty blends can include changes to color, concentration, pH, inhibitor content, additives and even electrical conductivity.

If you have questions about glycol testing or custom formulations, call us at 1-877-244-5525 (or +(1) 610-262-9686) or send an email to info@dynalene.com and talk to us about your needs.

Type here to search