Dynalene HC
Potassium Formate Heat Transfer Fluid
Recommended temperature range
Closed System :
HC-50: -50°C (-58°F) to 218°C (425°F) MSDS Technical Data Sheet
HC-40: -40°C (-40°F) to 218°C (425°F)
HC-30: -30°C (-22°F) to 218°C (425°F) Engineering Guide
HC-20: -20°C ( -4°F) to 218°C (425°F)
HC-10: -10°C ( 14°F) to 218°C (425°F)
Please call toll free at 1-877-244-5525 for more information.
Dynalene HC/Potassium Formate is a water based heat transfer fluid engineered to deliver the desirable low-end temperature performance of synthetic organic and silicone-based fluids. Dynalene HC safely exceeds the properties of familiar aqueous-based glycols to reach operating temperatures to below -50°C (-58°F). Its nontoxicity combines with the high level of performance to provide a highly effective fluid, posing little risk to the environment, equipment or personnel. Five concentrations of Dynalene HC are available to serve a wide range of applications. Custom formulations are available to satisfy special applications at any temperature between ambient and -62°C (-80°F).
Dynalene HC/Potassium Formate heat transfer fluid is an excellent alternative to calcium chloride and other brine solutions because it demonstrates a higher thermal efficiency and lower corrosion rate. This fluid as compared to other glycols, calcium chloride, and other brine solutions, should lower the leak and spillage rate, and reduce maintenance and repair costs on refrigerated systems. This is due to Dynalene HC's use of "safe" chemistries resulting in a high level of corrosion inhibition. The viscosity of calcium chloride solutions is also noticeably higher than Dynalene HC heat transfer fluid, which in turn makes Dynalene HC a more thermally efficient solution.
Call Us Toll Free:
1.877.244.5525
OR
